Client’s Inspector (electrical – instrumentation)
Je gaat als inspecteur toezicht houden op de kwaliteit van elektrische en instrumentatie-installaties bij leveranciers, inspecties uitvoeren, documentatie beoordelen en zorgen dat alles voldoet aan de eisen van TenneT voor offshore windenergieprojecten.
About TenneT
Europe’s energy transition is among the greatest challenges of our time. Its goal: To make Europe the first climate-neutral continent by 2050 at the latest. The Netherlands and Germany have therefore set themselves ambitious goals to expand offshore wind energy: as early as 2030, Germany and the Netherlands want to reach a capacity of 30 and 22.2 Gigawatts, respectively. Energy from offshore wind farms in the European powerhouse North Sea will play in this a crucial role. TenneT guarantees that this energy will reach the mainland – and in the most environmentally friendly way possible. That is why we have developed the 2GW program with a unique transnational approach. And thus increase the pace and efficiency of the energy transition.
Unit Large Projects Offshore NL (LON)
Based on the Energy agreement, where the targets and intentions for the transition to a more renewable energy supply are set, the Roadmap Offshore wind energy 2030 and the ambition to realise additional windcapacity prior to 2030 a roll-out strategy is being prepared for the medium term, including the IJmuiden Ver (DC) projects. This results in a commitment for TenneT to realise at least 2x (with potential up to 5) 2GW HVDC Grid Connection Systems which bring the power from offshore wind-farms in the North sea to the Dutch electricity grid to be commissioned between 2028 – 2030.
Taken
– Supports package lead (SPL) and QC coordinator with review all quality deliverables (as-built documents, punch lists, …) from the vendors against the Employer’s Requirements (subcontractors from the EPCI contractor);
– Support the discipline: electrical/instrumentation and control/automation teams with specific quality related issues or documents;
– Monitors the execution of Inspection and Test Plans specified in the Inspection Notification from the EPCI Contractor for the vendor manufacturing phase;
– Witness inspection activities (electrical inspections, hardware and software tests, FATs) from client side for these vendor packages based on risk based inspection schedule;
– Frequent travelling to the vendor’s construction locations;
– Facilitates remote inspections by video connection (like Hololens) to TenneT office;
– Report and monitor all quality related problems for each package (NCR, open points);
– Monitor the implementation of Employer’s Requirements with regards to electrical/ instrumentation and control/automation equipment of vendor packages;
– Align with the TenneT QC coordinator about the inspections, ITPs and quality issues;
– Act in the role of Client (End-user, Employer) when witnessing tests and inspections.
Voorwaarden
– At entry, TenneT performs a Pre-Employment Screening;
– Duty station for this position is Arnhem (two days a week), other days hybrid. You are willing to travel frequently internationally at locations in Europe (frequency and exact locations for now not known yet);
– Temporary position due to the manufacturing phase (where inspections take place) for the duration of two year;
– In possession of driver license valid in NL / Europe;
– Candidate has to live in the Netherlands.
Screening
– Pre-employment screening: If the candidate is selected to start, a pre-employment screening will be executed. We will send you the required documents to be filled in and returned as soon as possible. Your candidate is only allowed to start after the pre-employment screening has been completed successfully. The VOG Application is part of the screening. The VOG must be received before the candidate could start;
– All submitted candidates must be in possession of a valid Passport or ID card, which must be taken along to the interview and at the start of the assignment.
Beschikbaarheid
– Important, the candidate has to be available throughout the entire duration of the assignment.
Eisen voor de opdracht Inspector Electrical and Instrumentation
- Extensive experience with offshore projects in the Oil & Gas, Renewables or Shipping industry
- Experience in reviewing and drafting QC plans and ITP’s
- Minimum of 10 years of experience in QC inspection role
- Knowledge of International Codes and Standards (i.e. BS/IEC/ISO/API/ATEX/EEMUA) relating to electrical and instrumentation work
- Experience with variety of electrical, instrumentation and control/automation equipment inspections (a.o. switchgear, breakers, bushings, electric drives, automation systems)
- Fluent in English, both verbally and in writing
- Good communication and interpersonal skills
- Problem solving skills, including reviewing supplier action and recovery plans
- Ability to work independently and as part of a team
- At entry, TenneT performs a Pre-Employment Screening
- Duty station Arnhem (two days a week), other days hybrid
- Willing to travel frequently internationally within Europe
- Temporary position for duration of two years during manufacturing phase
- In possession of driver license valid in NL / Europe
- Candidate lives in Netherlands
- Pre-employment screening including VOG required before start
- Possession of valid passport or ID card
- Available for entire duration of assignment
Wensen voor de opdracht Inspector Electrical and Instrumentation
- Geen wensen
Geïnteresseerd in deze opdracht?
Zo gaan wij te werk
1. Reageer op de opdracht Inspector Electrical and Instrumentation
Wanneer je op deze opdracht reageert, starten wij direct met het beoordelen van een mogelijke match.
- We bekijken of jouw ervaring en cv aansluiten bij de opdracht
- We leggen jouw profiel langs de lat van de eisen van de opdrachtgever
- We checken je tarief en zetten dit af tegen de actuele markt om je positie te bepalen
Met deze werkwijze vergroot je jouw kansen op succesvolle bemiddeling. Je hoort op werkdagen binnen 24 uur van ons of er sprake is van een match en of we samen het offertetraject kunnen beginnen.
2. Introductie bij TenneT
Past jouw profiel bij de eisen van TenneT? Dan volgen de volgende stappen:
- Wij stellen jou voor aan TenneT
- Indien er aanvullende stukken nodig zijn, zoals een motivatie, diploma's, referenties of een VOG, zorgen wij voor het verzamelen hiervan
- We stellen gezamenlijk een overtuigende offerte op waarin jouw toegevoegde waarde helder naar voren komt
- Je krijgt van ons een tariefadvies op basis van de marktsituatie, maar jij beslist uiteindelijk zelf over het uiteindelijke tarief
Ontvangen we een positieve reactie van TenneT, dan plannen we doorgaans een kennismakings- of intakegesprek met je in.
3. Aftrap van de opdracht!
Bij ons kun je rekenen op openheid en transparantie. Doordat we direct schakelen met zelfstandigen, houden we de inhuurketen overzichtelijk en kun jij altijd precies zien hoe het traject verloopt.
- Gemiddelde marges: we rekenen 13% marge over je uurtarief; dit daalt na het eerste jaar naar 11%.
- Supersnelle betaling: zodra de opdrachtgever heeft overgemaakt, staat jouw brutoloon op werkdagen altijd binnen 24 uur op je rekening.
- Altijd je eigen keuzes: bij ons heb je geen concurrentie- of relatiebeding. Wanneer je goed werk levert en de opdrachtgever biedt meer werk aan, mag je dit direct aannemen, volledig vrij dus.
Zo bieden we jou heldere afspraken en behoud je de zelfstandigheid die past bij ondernemen op jouw manier.
Reageer nu binnen 24 uur reactie
Even voorstellen
Wij zijn LibLab
Wat fijn dat je je weg hebt gevonden naar LibLab! Dit platform is speciaal ontwikkeld voor jou als zelfstandig professional en sluit naadloos aan op de wensen en inzichten uit de dagelijkse praktijk. Met inmiddels ruim 18 jaar eigen ervaring als zelfstandig professionals weten wij precies welke uitdagingen je kunt tegenkomen, bijvoorbeeld bij het binnenhalen van nieuwe opdrachten of het samenwerken met tussenpersonen. Omdat we zelf iedere dag met deze situaties te maken hebben gehad, merken we dat de traditionele methodes niet langer toereikend zijn en echt toe zijn aan vernieuwing. Dát is precies waar wij ons voor inzetten.
De meerwaarde van LibLab voor jouw opdrachten
- Snel duidelijkheid: zodra je je aanmeldt voor een opdracht ontvang je binnen één werkdag bericht of we een goede match zien
- Eerlijke marges: je betaalt 13% marge en vanaf het tweede jaar wordt dit percentage automatisch verlaagd naar 11%
- Supersnelle uitbetaling: nadat de klant het bedrag heeft voldaan staat je factuur of brutoloon binnen 24 uur op je rekening
- Volledige vrijheid: wij werken zonder relatiebeding of concurrentiebeding je kunt dus altijd elke vervolgopdracht zelf bepalen